TESCOM Anderson Greenwood Differential Pressure Manifolds


M1/M110 SERIES TESCOM Anderson Greenwood the M1 is designed to mount to the signal lines and an instrument with connections different to 2 1/8” (54 mm) between signal taps. These include recording orifice meters, small differential pressure indicators and some differential pressure switches	MM1 SERIES TESCOM Anderson Greenwood the MM1 is used to set or reset differential pressure switches during initial plant start-up or in assemblies for portable differential pressure test equipment used for any miniature differential pressuremeasuring device

A22N SERIES TESCOM Anderson Greenwood the A22N is designed for remote mounting differentialpressure transmitters, for instrument isolationand zeroing, venting and calibration. It’s suitable forboth liquid and vapor service and for applicationswith differential pressure	M3A SERIES TESCOM Anderson Greenwood the M3A equalizer manifold fits between the transmitter and the 2-bolt flanges (futbols) and is designed for use with differential pressure transmitters where low-cost direct coupling is desired and piping specifications require individual block valves	M4A/M4T SERIES TESCOM Anderson Greenwood the M4A is designed for mounting on differential pressure transmitters with 2 1/8” (54 mm) center-to-center connections. The M4T is used in applications where direct coupling to orifice flanges is not desired

M45A SERIES TESCOM Anderson Greenwood the M45A/T is designed for mounting on differential pressure transmitters with 21/8” (54 mm) center-to-center connections	AX3A/AX3T SERIES TESCOM Anderson Greenwood the AX3A and AX3T are three-valve manifolds that enable instrument operation, isolation and zeroing in a single unit and are suitable for liquid or vapor service	M20 SERIES TESCOM Anderson Greenwood the M20 is uniquely suited for applications withserious space limitations, such as winterizing enclosures, offshore oil production platforms and power plant rack designs. No equalizing valving prevents transmitter overheating. For hazardous process fluids, a dual locking and venting feature assures personnel safety

M24A/M24T SERIES TESCOM Anderson Greenwood the M24A and M24T are five-valve manifolds that enable instrument operation, isolation, zeroing,calibration and venting to close the system in a singleunit. They are suitable for liquid or vapor service	A26 SERIES TESCOM Anderson Greenwood the A26 is a five-valve manifold that enables instrument operation, isolation, zeroing, calibration and venting to close the system in a single unit. It is suitable for liquid or vapor service	MDP SERIES TESCOM Anderson Greenwood lightweight and compact 5 valve manifold designed for direct or remote mounting to differential pressure transmitters for pressures to 6000 psig (414 barg)

DPM SERIES TESCOM Anderson Greenwood the DPM is a five-valve power/vent pattern manifold for rack or pipe-stand mounting to a differential pressure transmitter that enables instrument operation, isolation, zeroing, calibration and venting in a single unit suitable for liquid, steam or vapor service	MM5 SERIES TESCOM Anderson Greenwood suitable for use in compact instrument control loops for flow metering and differential pressuretransmitters; for mounting in control panels and for gas sampling equipment