MANIFOLDS VALVE
Static Pressure Manifolds
TESCOM Anderson
Greenwood Static Pressure Manifolds two valves block and bleed, have several valve designs. It is available with thread and flange connection and endure pressure up to
6,000 psi
Liquid Level Manifolds
TESCOM Anderson
Greenwood Liquid Level Manifolds two block valves with no equalizer passage, The manifold is designed for use with DP – style pressure transmitters in liquid level service on pressurized vessels
Differential Pressure Manifolds
TESCOM Anderson
Greenwood Differential Pressure Manifolds three/five valve mount to the signal lines and instrument. The manifold is available with an integral metal seat or with various
replaceable, roddable soft seats
Integral Manifolds
TESCOM Anderson
Greenwood Integral Manifolds is uniquely connected to the transmitter of a
specific model and cannot be used on a different transmitter brand. This section is presently characterized by manifolds designed specifically
for Rosemount® Transmitter Models 3051, 2024 and 3095
Natural Flow Gas Manifolds
TESCOM Anderson
Greenwood Natural Flow Gas Manifolds, It is designed for repetitive bubble-tight closure, safety, and a long trouble-free life with easy maintenance
Distribution Manifolds
TESCOM Anderson Greenwood Distribution
Manifolds, designed to distribute air for panel and cabinet instrumentation. Can easily be wall or pipe stand mounted. These valves are suitable for pressures to 725 psig [50 barg], 3000 psig [207]
PRIMARY ISOLATION VALVE
Single or Double Block and Bleed Valve
TESCOM
Anderson Greenwood Single or Double Block and Bleed Valve, Integrally forged, one-piece block and bleed assemblies for primary isolation of pressure take-offs, where the valve is
directly mounted to the vessel or
process pipe. Instruments may be
directly mounted to the valve outlet or
alternatively remotely mounted with gauge lines/impulse pipe work
Monoflange Single or Double Block and Bleed Valve
TESCOM
Anderson Greenwood Monoflange Single or Double Block and Bleed Valve, Integrally forged one-piece block and bleed assemblies for primary isolation of pressure take-offs, where the valve is
directly mounted to the vessel or
process pipe. Instruments may be
directly mounted to the valve outlet or
alternatively remotely mounted with gauge lines/impulse pipe work
Keyblock Chemical Injection Quill
TESCOM
Anderson Greenwood Keyblock Chemical Injection Quill, designed to ensure high pressure media can be injected into the optimum position of the flow stream through the process pipe work. It also enables clean
product samples to be removed from the
main flow. The quill features a length of heavy wall pipe
with a screwed connection into the valve body. or 45-degree options
Keyblock Check Valve
TESCOM
Anderson Greenwood Keyblock Check Valve,
designed to ensure safe operation and prevent a
back flow condition during the
injection of liquids or gases to a process line,
incorporating a poppet check valve with
1/2-inch NPT
HAND VALVE
Soft Seated Hand Valves
TESCOM Anderson Greenwood Designed
for maximum system reliability, these valves are built
for reliable, bubble-tight service with a variety
of end connections, seat materials and stem packing,
in 316 SS or CS and are available
to
meet NACE requirements
Hard Seated Hand Valves
TESCOM
Anderson Greenwood Designed for safe,
repetitive bubble-tight closure, simple maintenance and a long, trouble-free life
Globe Pattern Hand Valves
TESCOM Anderson Greenwood Valves is suitable for severe service, high
pressure/
temperature applications and
features a Cv rating of
1.95, which allows for high flow
capacities. Its
globe
pattern construction allows for
throttling of the most
severe services
Roddable Hand Valves
TESCOM Anderson Greenwood Valves is suitable for severe service, high
pressure/
temperature applications and
features a Cv rating of 9.8,
which allows for high flow
capacities. It
is also ideal for
process conditions where
potential plugging is a concern
Mini Valves
TESCOM Anderson Greenwood Mini valves facilitate safe, compact and economical installations and are
excellent for straight
isolation applications
GAUGE VALVE
Block and Bleed Gauge Valves
TESCOM Anderson Greenwood block and bleed gauge valves
with an interchangeable hard or soft seat and an integral bleed plug
specifically designed to facilitate safe, compact, economical gauge
installation and operation
Multi-Port Gauge Valves
TESCOM Anderson
Greenwood
compact, lightweight multi-port valves
allow for versatile vertical or
horizontal
installation positioning
of gauges or pressure switches without requiring additional penetration of the
main piping
OS&Y Root Valves
TESCOM Anderson
Greenwood
OS&Y gauge valves are designed
for use with
gauge mountings and other pressure
instruments in
refineries and chemical
plants
